- #Not connected to a network lightwright console link Patch
- #Not connected to a network lightwright console link password
- #Not connected to a network lightwright console link Pc
- #Not connected to a network lightwright console link windows
But the IP address should be within the range configured in the previous step. Type ipconfig and record the following information.
#Not connected to a network lightwright console link password
Enter the password or passphrase configured in a previous step.Į. Select the configured SSID that you configured in a previous step.ĭ. In Wi-Fi settings window, select Show available networks.Ĭ. At this time, you can disconnect the Ethernet cable if desired. Log into the wireless using the new credentials: admin / Cisco123! or the credentials that were assigned to you.Į. Provide the current password and the new password as assigned by your instructor or Cisco123!.ĭ. Locate the password settings for the administrative account.ī. Step 4: Change the default administrative password.Ī. The router may need to reboot at this time. If possible, you may be providing the starting and end IP addresses or the maximum number of IP addresses available for connecting hosts wirelessly. Configure the LAN information for your assigned subnet. Verify that the wireless router is used as the DHCP server.Į. Configure the router’s IP address and subnet mask as assigned by your instructor.ĭ. Configure router device name if available.Ĭ. Enter a passphrase or password as assigned by your instructor or use Cisco456! as an example.ĭ. Select AES cipher and personal if available.Ĭ. In the SSID or network name field, enter your assigned SSID.ī. You will configure the SSID or network name and security in the wireless settings, configure DHCP settings, and set a new administrative password. In this lab, you will not be configuring the wireless router to the internet. Part 2: Configure Basic Wireless Settings
#Not connected to a network lightwright console link windows
In the Windows Security window, enter administrative user credentials provided by your instructor. Enter the IP address of your default gateway in the Address field, and then press Enter.ī. Open Microsoft Edge or other web browsers. What is the default gateway for the computer?Īnswers may vary – 192.168.1.1 Step 2: Log in to the router.Ī. If it is necessary to renew the IP address, enter ipconfig /all at the prompt. Open a command prompt and type ipconfig to determine the IP address of the default gateway, which should be the IP address of your wireless router. Click Close to accept the network location Public.Į. If prompted by the Set Network Location window, select Public network. This will be explained later in the course.ĭ. Note: If this is the first time connecting to the lab router, follow these instructions to set a network location.
#Not connected to a network lightwright console link Patch
Connect the computer to one of the Ethernet ports on the wireless router with an Ethernet patch cable. Boot the computer and log in as an administrator.Ĭ. Plug in the power for the wireless router. Note: Only use configurations assigned by the instructor.ī.
Your Assigned SSID: The Answers assigns your router’s SSID. Router Username / Password: Example: admin / password Where # is a different number assigned to each router. IP address, subnet mask, DHCP start IP address and maximum number of users, router password, and router name#. Instructor Note: You will need to provide the student with the following information for the router: Ask the instructor for the following information that is used during the lab. Instructions Part 1: Log into the Wireless Router Step 1: Connect the computer to the router.Ī. Instructor Note: You will need to provide unique router address settings, DHCP server settings, SSID for each router in the classroom, and a router access password.
Follow the same steps for setting up a 5 GHz wireless connection or when setting up both 2.4 GHz and 5 GHz connections. Note: All wireless settings in this lab are for a 2.4 GHz wireless connection. A Windows computer with wired and wireless network cards installed.
#Not connected to a network lightwright console link Pc
In this lab, you will configure basic settings on a wireless router and connect a PC to router wirelessly. Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only. 6.1.3.10 Lab – Configure a Wireless Network
0 kommentar(er)
